WASHING AGENT FOR REMOVAL OF THE REMAINDER OF CEMENT AND LIME MORTARS
FOR INTERNAL AND EXTERNAL USE

USE

AVAL KL 55 is designed for removal of even the oldest remains of various cement and lime mortars, as well as dirt and layers caused by the same. It can be also used to wash the remainder of dirt, deposit and stains caused by minerals contained in water, rust, etc. It is suitable for cleaning ceramic (glazed tiles, terracotta, gres tiles, clinker) and stone tiles, toilets, as well as chromium-coated, varnished, high-quality noble steel or plastic surfaces. It is suitable for indoor and outdoor use.

PROPERTIES

AVAL KL 55 is efficient and effective. Owing to the optimum recipe, it enables quick removal of the oldest dirt. AVAL KL 55 contains mineral acid; therefore cleaning of elements and substrates sensitive to acid, such as marble, enamel etc. using the agent is not recommended. In case of doubt, make a test on the surface using a spot that is not visible.

APPLICATION

At first, slightly soak the places contaminated by products containing cement or lime. Use a brush or a sponge to apply the agent onto contaminated area and to clean the surface afterwards. Depending on substrate parameters, degree and type of contamination, use undiluted or dilute the agent (see the table). Soak the places that are particularly heavily contaminated with undiluted agent. Leave for a few minutes in order to allow the agent to act. Then remove the contamination. Act carefully so as not to apply the agent surfaces where cement or lime should remain e.g. on ceramic tiles with cement joints. Agent application without appropriate dilution may result in unwanted removal of mortar or mortar discolouration. In any case, having finished cleaning, wash the whole surface thoroughly with clean water or a slightly alkaline water solution. Absorptive surfaces can be secured against contamination using AVAL KT 95 protective agent. Thick old remainder of cement mortars such as AVAL KM 11 adhesive, AVAL KM 41 levelling mortar, AVAL KT 111 plastering mix and the like No dilution Cement layers caused by e.g. AVAL EXTRA GROUT, AVAL KM 11 ADHESIVE and the like 1: 3 to 1: 5 Remainder of dirt and lime 1: 5 to 1: 10 Rust stains and tap water stains 1:10: to 1:15 Use a brush or a sponge to apply the agent onto contaminated area and to clean the surface afterwards. The information comprises basic instructions of product application and do not relieve users of responsibility for work in accordance with good construction practice and OHS regulations.

TOOLS

Brush or sponge Wash the tools with clean water directly after use.

CONSUMPTION

Consumption depend on dirt degree.

PACKAGING

Plastic containers: 1 kg Pallet: 432 kg in 1 kg containers

STORAGE & TRANSPORT

Transport and keep the agent dry in tightly closed original packaging, in temperatures above 0°C. Avoid overheating. Shelf life is 36 months from the production date on the packaging.

CAUTION

Irritant. Protect skin and eyes. Keep away from the reach of children. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. In case of direct contact with skin, rinse with plenty of water with soap. In case of ingestion, immediately seek medical attention and show the packaging or label. Do not combine with other cleaning agents, in particular those that contain chlorine.

TECHNICAL DATA

Substrate and ambient temperature – from +5°C to +30°C Emulsion density – 1.0 g/cm3 pH ≥2