PROTECTIVE AGENT FOR NON-GLAZED TILES AND JOINTS, PROTECTION AGAINST STAINS CAUSED BY WATER, OIL AND GREASE
FOR INTERNAL AND EXTERNAL USE

USE

AVAL KT 95 is designed for impregnation and protection of surfaces of increased absorption. It is recommended for non-glazed ceramic, stone and other surfaces as well as surfaces made of cement mortars (e.g. joints). Without proper impregnation, surfaces of this kind are not resistant to contamination (for example oil, grease, coffee, tea and water). AVAL KT 95 provides permanent protection from the contamination. It is suitable for internal and external use.

PROPERTIES

AVAL KT 95 is a ready-to-use water acrylic dispersion. It is efficient, convenient and easy to use. AVAL KT 95 is transparent when dry, and provides slight gloss to non-glazed tiles and fresh appearance to existing matt tiles. Due to its considerable penetration ability it penetrates the top tile layer, creating a permanent protective coat on tile surface and facilitating maintenance. The floor can be charged with heavy load and is resistant to all commonly used cleaning agents. AVAL KT 95 is frost-proof. Applied on the surface, it is resistant to temperatures ranging from -20°C to +80°C.

SUBSTRATE PREPARATION

The substrate should be dry and free from anything that may impede adhesion of AVAL KT 95, in particular dust, dirt, oil, grease and wax. When tiles have been fixed and pointing have been carried out, clean the surface using special agents or water only. Remove the remainder of cement with AVAL KL 55 washing agent.

PRODUCT PREPARATION

AVAL KT 95 is a ready-to-use emulsion. It may not be combined with other materials, diluted or thickened.

APPLICATION

Apply undiluted AVAL KT 95 over the substrate with a sponge or paintbrush to form a thin and even coat. Do not leave pools! On more absorptive substrates, after ca. 30 minutes of drying, apply the liquid again, cross-wise to the first layer. Floor can be used not earlier than 24 hours after emulsion application. Joints can be traded when they have hardened, applying the liquid with a thin paintbrush 2 weeks after pointing. The information comprises basic instructions of product application and do not relieve users of responsibility for work in accordance with good construction practice and OHS regulations.

CONSUMPTION

On average, 1 kg of emulsion is used for ca. 15÷20 m2. In practice consumption depends on how absorptive the substrate is and what kind of ceramic material is applied.

TOOLS

Sponge or paintbrush Wash the tools with clean water directly after use. To remove the remainder of AVAL KT 95 emulsion, use AVAL KL 65 washing agent.

PACKAGING

Plastic containers: 0.25 kg, 1 kg, 5 kg Pallet: 300 kg in 0.25 kg containers 432 kg in 1 kg containers, 540 kg in 5 kg containers

STORAGE & TRANSPORT

Transport and keep the emulsion dry in tightly closed original packaging, in temperatures above 0°C. Avoid overheating. Shelf life is 12 months from the production date on the packaging.

CAUTION

AVAL KT 95 varnish for painting internal or external finishing elements: maximum VOC content in the product: 5.46 g/l; maximum allowable VOC content: 150 g/l. Keep away from the reach of children. In case of direct contact with eyes, seek medical attention.

TECHNICAL DATA

Substrate and ambient temperature – from +5°C to +25°C Floor utilisation – after 24 hours Emulsion density – 1.0 g/cm3