|
| The Dutch in ATLAS | | The representatives of Veerman Beheer company, the new client of ATLAS GROUP from the Netherlands, visited our plants. The visitors tested our cementitious products as well as gypsum ones. |
| ATLAS purchased the plant in Grodno (Belarus). | | ATLAS purchased majority stake of private enterprise Tajfun- the major manufacturer at the building sector in Belarus. Thanks to that investment ATLAS has strengthen its position in the Eastern market. ATLAS and Tajfun shall invest ca. 4 million USD for the modernization and manufacture development, within the next two years. |
| Atlas sells again in Dubna- Moscow Region | | Atlas Group reopens Sales Office in Dubna, in the 15th of September. Thus, after three years break, the direct sales of Atlas products in Russia has been reactivated. |
| The quality and environmental protection in one system together | | We have received the approval that Atlas company has implemented and respect an integrated system of the quality and environment management conforming with DIN-EN ISO 9001:2000 and DIN-EN ISO 14001:2005. The certificates were issued of July 2, 2008. We are one of the few companies in branch, possessing an integrated system of management. |
| Atlas is getting dressed the Lithuanians | | 'The best cloth for home' that is the slogan of the year for Atlas insulating system promotional campaign in Lithuania |
|
|
|
|
|
|
AVAL KT 15 Primer under silicate renders
on reinforced layer of building insulation systems
on cement, lime-and-cement, gypsum pasters, concrete, plasterboards
Properties
enables application of thin-layer renders
increases bond strength
protects against stains on the surface
Main parameters
consumption: ca. 0.3 kg/ m2
bond strength: min. 1.0 N/ mm2 |
|
|
|
|
|
|
AVAL KT 76 Primer under silicone renders
applied on reinforced layer of building insulation systems
on cement. lime-and-cement, gypsum plasters, concrete, plasterboards
Properties
enables application of thin-layer renders
prevents appearance of stains on the thin-layer render
Main parameters
consumption: ca 0.3 kg/ m2
adhesion: min. 1 N/ mm2 |
|
|
|
|
|
|
AVAL KT 53 Adhesive for fixing foamed polystyrene boards in EWI systems
adhesive for fixing polystyrene panels
on brick walls, ceramic blocks, conrete,
gas concrete, cement and lime-and-cement plasters
Properties
good adhesion to ceramic and mineral substrates
Main parameters
layer thickness: 2- mm,
consumption: 4-5 kg/m2 |
|
|
|
|
|
|
AVAL KT 64 Thin-layer acrylic render of rustic texture
for decorative finishing,
external layer of thermal building insulation systems,
for cement, lime-and-cement plasters, concrete, plasterboards
Properties
rustic texture, 655 colours, two sizes of grain: 2 and 3 mm,
elastic, resistant ot mechanical damages
Main parameters
consumption: from 3 kg/m2
bond strength: min. 1.5 MPa |
|
|
|
|
|
|
AVAL KT 16 Priming mass under thin-layer renders
increases adhesion of the renders,
undispensable element of the EWI systems,
primer for every kind of substrates:
mineral, cement, lime-and-cement plasters,
smooth substrates of low absorption, OSB
Properties
enables application of renders and adhesives,
available in 4 colours (white, red-brick, brown, graphite
Main parameters
consumption: ca. 0.3 kg/m2 |
|
|
|
|
|
|
AVAL KT 60 Thin-layer acrylic render of spotted texture
for decorative finishing,
external layer of EWI systems,
for cement, lime-and-cement plasters, concrete, plasterboards
Properties
spotted texture, 655 colours,
three thickness of aggregate: 1.5, 2 and 3 mm,
elastic, resistant to mechanical damages
Main parameters
consumption: from 2.5 kg/m2
bonding strength: min. 1.5 MPa |
|
|
|
|
|
|
AVAL KT 77 Decorative, mosaic render
recommended for pedestals, foundations, balcony walls
for aaplication on reinforced insulation layers,
for cement, lime-and-cement plasters, concrete, plasterboards,
Properties
60 compositions of quartz aggregates,
resistant to damages
Main parameters
consumption: 3-4 kg/m2
adhesion: 0.7 N/m2 |
|
|
|
|
|
|
AVAL KT 55 Adhesive for building EWI systems wth polystyrene
mortar for fixing polystyrene panels;
for brick walls, blocks and ceramics,
concret, gas concret, cement and lime-and-cement plasters,
for making reinforced layer
Properties
increased elasticity and adhesion
Main parameters
layer thickness: 2-5 mm
consumption: 4-5 kg/m2 (for polystyrene fixing)
3 - 3.5 kg/m2 (reinforced layer) |
|
|
|
|
|
|
AVAL KT 190 Adhesive for building insulation systems with mineral wool
mortar for fixing mineral wool
on brick walls, ceramic blocks,
concrete, gas concrete, cement and lim-and-cement palsters;
mortar for making reinforced layer.
Properties
increased bonding to mineral substrate and mineral wool,
high vapour permeability
Main parameters
layer thickness: 4-6 mm,
consumption: 4.5-5.5 kg/m2 (for fixing mineral wool panels)
5.5 kg- 6.5 kg/ m2 (for reinforced layer) |
|
|
|
|
|
|
AVAL KT 85 ADHESIVE FOR EWI systems WITH POLYSTYRENE
adhesive for fixing polystyrene panels
on brick walls, ceramic blocks, gas concrete, concrete,
cement and lime-and-cement plasters;
for making reinforced layer
Properties
increased elasticity and adhesion,
possibility of application in lower temperature (from 0°C to +25°C
Main parameters
layer thickness: 2-5 mm
consumption: Foamed polystyrene board fixing - from 4.0 do 5.0 kg/m2
Reinforced layer preparation – from 3.0 to 3.5 kg/m2 |
|
|
|
|
|
|
AVAL KT 73 Thin-layer silicate render of rustic texture
for decorative finishing
external layer of building insulation systems
for cement, lime-and-cement plasters, gypsum, concrete, plasterboards
Properties
rustic texture, 352 colours, thickness of aggregate: up to 2 mm
vapour permeable, enables free osmosis of water vapour
Main parameters
consumption: ca. 3 kg/ m2
adhesion: min. 0.3 N/ mm2 |
|
|
|
|
|
|
AVAL KT 75 Thin-layer silicone render of rustic texture
for decorative finishing
external layer of building insulation systems
on cement, lime-and-cement and gypsum plasters,
concrete and plasterboards
Properties
rustic texture, 655 colours, thickness- up to 2 mm
self-cleaning, for surfaces exposed to dirt,
resistant to cleaning and weather conditions
Main parameters
consumption: from 2.5 kg/ m2
adhesion: min. 0.3 N/ mm2 |
|
|
|
|
|
|
AVAL KT 74 Thin-layer silicone render of spotted texture
for decorative finishing
external layer of building insulation systems
applied o:n cement, lime-and-cement gypsum plasters,
concrete, plasterboards
Properties
spotted texture, 655 colours, two grain sizes: 1.5, 2 mm
self-cleaning, for surfaces exposed to dirt,
resistant to cleaning and weather conditions
Main parameters
consumption: from 2.5 kg/ m2
adhesion: min. 0.3 N/ mm2 |
|
|
|
|
|
|
AVAL KT 72 Thin-layer silicate render of spotted texture
for decorative finishing
external layer of insulation building systems
for cement, lime-and-cement plasters, gypsum, concrete, plasterboards
Properties
spotted texture, 352 colours, two aggregate thickness: 1.5 and 2 mm,
vapour permeable- enables free osmosis of water vapour
Main parameters
consumption: from 2.5 kg/m2
adhesion: min. 0.3 N/ mm2 |
|
|
|
|
|
|
AVAL KT 35 Thin-layer mineral render of rustic texture
external layer in EWI systems,
for cement, lime-and-cement plasters, concrete, plasterboards
Properties
rustic texture, 41 colours, 2 aggregate sizes: 2 and 3 mm,
hydrophobic, of high vapour permeability,
reinforced with micro-fibres
Main parameters
consumption: 3-4 kg/m2,
compressive strength : CSII category |
|
|
|
|
|
|
AVAL KT 137 Thin-layer mineral render of spotted texture
external layer of EWI system,
for cement plasters, lime-and-cement plasters, concrete, plasterboard
Properties
spotted texture, 41 colours, three aggregate sizes: 1.5, 2 , 3 mm
hydrophobic, of high vapour permeability,
reinforced with mocro-fibres
Main characteristic
consumption: from 2.5 kg/m2,
compressive strength: CSII category |
|
|
|
|
|
|
|
|
 |  | | colour 0545 |
|
|
|
|
|
|
|
